As consumers have higher and higher requirements for home furnishing panels, there are more and more requirements for the flatness and style of the panel surface. In order to meet the needs of consumers, more high-end PET flat-pasting production lines are applied.
In the field of high-end furniture guidance, artificial panels are made of PET high-gloss, matte, and skin-feel materials. After high-temperature pressing, panels with high surface flatness and better surface effects can be obtained for the manufacture of high-end furniture. So, what is the process of the PET flat-pasting production line? First, we need to perform double-sided dust removal on the panel parts to prevent raised dust particles on the surface of the panel. Then, we preheat the panel to reduce the temperature difference when the PUR glue is applied to the surface of the panel. Next, it is the core process of PUR hot melt glue coating. After gluing, the sheet or coil PET is attached to the panel and enters the pressing process. Finally, according to the process requirements, beveling, trimming, laminating and other processes are performed to complete the discharge.
Compared with traditional boards, PET boards made by PET flat lamination are more wear-resistant and scratch-resistant, and are not easy to leave fingerprints and grease on the surface, making them easy to clean. The PET flat lamination production line does not use paint, which is safer and more environmentally friendly. It is a real paint-free board. Welcome everyone to come and bring back your little "PET".